• Comes completely assembled. All you need to do is open the box, unfold the rollers and ride.
• 3.25 inches ( 8.25 cm ) diameter, 15 inch ( 38 cm ) wide drums are easy to ride and give a better workout than 4 inch drums. CycleOps rollers are available with long lasting aluminum alloy or tough, economical PVC drums.
• .23 inch, ( 6 mm ) wall thickness, heavy duty aluminum drums are designed for a lifetime of performance riding. Thicker walls also offer more rotating inertia which better simulates "on the road riding".
• Aluminum drums are lathe turned after the bearings are installed so you are assured of near-zero runout. In fact run-out is always less than 0.002 of an inch. Put another way, these drums are machined round to within twice the width of a human hair!
• Accepts bicycles with wheelbases from 38.5 inches (98 cm) to 44.5 inches (113 cm). A bicycle's wheelbase is the distance from the rear wheel axle to the front wheel axle in a straight line. Always adjust the front roller so it is slightly ahead of your front wheel's axle.
• Precision CNC machined and lathe turned drums assure you of a smooth and quiet ride.
• Lifetime lubricated, sealed radial bearings. 100% sealed to give you a lifetime of maintenance free training.
• Oversize axles, 3/4 of an inch
  ( 2 cm ) between the bearings, will not flex or bend. These rugged axles are perfect for heavy, 200 pound plus
  (91 kilogram plus) riders or punishing environments.

• Heavy duty, powder coated, 16 gauge channel steel frame will not flex or twist even during the most rigorous workouts.
• Six large rubber feet provide rock solid support to the flex free steel frame.
• Tough, Gloss Black, powder coating strongly resists what can often be a corrosive and punishing environment.
• Low profile design keeps you closer to the floor. Getting on and off this set of rollers is easy and safe.
• Knobs, not nuts, allows you to adjust or even completely disassemble these rollers with ease. Ideal if you share your rollers or use them with two different bikes.
• Folds in half and stands on its end, for easy storage.
• Available with heavy wall PVC or longer wearing aluminum alloy drums. PVC rollers are designed for indoor use only. Alloy drum rollers are tougher and can be used for outdoor pre-race warm ups.
• Solidly backed with a Lifetime manufacturer's warranty from CycleOps.
• We urge you to compare CycleOps fine rollers to another well known American manufacturer. Click here to visit their Rollers page.
• Factory warranty service and help with technical questions is available from CycleOps in Madison, Wisconsin. Call them at (800) 783-7257, visit their site at Official CycleOps Web Site or email them at Info@CycleOps.com by clicking on the underlined text .

To get the best workout in the least amount of time we suggest using a heart rate monitor. Simply set an upper and lower heart rate zone, put the wireless monitor on and start cycling. Simply by keeping your heart rate within the zone limits you will improve the efficiency and results of your cycling session.
If your goal is to lose weight a heart rate monitor will prove invaluable. A heart rate monitor will not only count your calories burned but also guide you to the heart zone that allows you to burn calories from fat. A good quality heart rate monitor can be purchased for as little as $49.88. Click on the underlined text to visit our Heart Rate Monitors Section.

• Easily attaches to all CycleOps or SportsCrafters roller models. Simple, 4 knob adjustment, to install or remove.
• Heavy duty, powder coated, 16 gauge channel steel frame will not flex or twist even during the most rigorous workouts.
• Ideal for getting in a ride after a long day at work. Enjoy the benefits of roller riding with out having to concentrate on balance and spin.
• Fork stands make learning how to ride rollers much easier. You can also share your rollers with a less experienced rider by adding a fork stand.
• Fits road or MTB forks.
• Use only with steel or cro-moly forks. Not recommended for use with carbon or aluminum forks.
• Comes with a quick release skewer.
• Proudly made in the USA and solidly backed with a one year warranty.
• Click here to visit the SportCrafters Rollers page. All of their accessories will fit CycleOps Alloy or PVC rollers pictured above. You may also use SportCrafters accessories on some Nashbar brand rollers.

Heavy and bulky items such as rollers cost more to ship and can take longer to arrive.
•Please allow 7-10 days for ground shipping, and 2-3 days for air.
•An additional $10 may be added for ground shipment, and $45 for air.

At Branford Bike we want you to be happy and satisfied with everything you purchase from us. We understand that sometimes you will need to return a product because it was not quite what you wanted. You may return anything you purchase from us within 60 days and unused, for an immediate exchange or refund.

Our Secure Order Form is easy to use. Simply fill in the boxes as you would for a traditional paper catalog order form.

Our Secure Order Form opens in a separate window that you may resize and tile behind our online catalog. After filling in your name, address and card information you may leave the order window open. Browse through our catalog and when you wish to purchase an item simply "cut and paste" the part number and description to the appropriate order form boxes.

When you are done shopping, submit your order for error checking, and then for processing. We will email you a confirmation within 10 minutes. Another, more detailed confirmation, will follow when we ship your order.

   
We accept Visa, Discover and MasterCard for payment.
We will NOT charge your card until your order is shipped.

To print this page in Netscape Navigator or Microsoft Explorer:
Choose File from the upper menu bar, click, and then click on Print...